banner
Categories Class
Online Service
  • Contact Person:

    Tracy Li

  • Contact Person:

    Candy Ou

Contact Now

News

Leading to the ice cream machine

Case 1: If there is a problem with the ratio, the slurry will have too much moisture, which will result in the freezing cylinder when the same hardness is in the position. At this time, wait for the melt to stop, and then lower the hardness position. (The freezing cylinder must not force the discharge valve, which may cause stirring. Broken).

    Case 2: The hardness is too high. The main reason is that the surrounding environment is taken. Due to the long-term work, it is necessary to adjust the hardness of the ice cream machine properly. When the surrounding environment is lowered and the hardness is not adjusted in time, it may also become a freezing tank phenomenon. Forcibly pressing the discharge valve will easily cause the agitator to break).

    Case 3: The difference in the amount of cake on both sides is too large. The side with less cake is prone to the phenomenon of freezing cylinders. (The freezing cylinder should not force the discharge valve, which will easily cause the mixer to break). Ways to avoid: On the side of the cake, make a few pours into the storage basin, so that the amount of cake on both sides is basically balanced.

    Case 4: After cleaning the ice cream machine, the water in the mixing tank is not cleaned. This situation is also very likely to cause freezing freezing phenomenon. (The freezing cylinder should not force the discharging valve, which will easily cause the agitator to break).

    Case 5: If you don't beat the cake for a long time, and the machine is constantly cooling, it is easy to cause the freezing tank phenomenon at this time. (The freezing cylinder should not force the discharge valve, which will easily cause the agitator to break). Ways to avoid: Do not beat the cake for more than 30 minutes, please pause the ice cream machine, or put some cakes back into the storage tank.

    Case 6: The material tank has no material. When there is no material in the material tank, the material can not be extruded. The air enters a large amount to cause the freezing cylinder. (The freezing cylinder must not force the material discharge valve, which may cause the agitator to break).

    Situation 7: If the cleaning machine is filled with water, the button should be cleaned but it is fully automatic. This situation will also cause the freezing cylinder. (The freezing cylinder should not force the discharge valve, which will easily cause the agitator to break).

    Finally, Xiaobian told everyone that the frozen tank should not be used any more, stop in time, and find the problem for the treatment.


Wechat Scan QR Code to sign in

  • facebookfacebook
  • TwitterTwitter
  • insins
  • youtwobeyoutwobe
  • googlegoogle
Copyright Guangli Machinery (Xinhui) Co.,Ltd. Technical support:华企立方粤ICP备19016532号